EQUIPMENT AUDIT - ELECTRICAL AUDIT

Why Equipment Audit ..?

» We should remember that every equipment is designed for the Maximum Loading Under worst case Conditions , which is NOT the case in real life situation...
» Every equipment is losing its Best Efficiency Point due to ageing ...
» Every equipment is to be tuned for the Specific application of your Industry , in order to achieve the best output at lesser operating Cost.
» Hence we study the Operating Conditions and the Working style of each & every equipment under the Real –Time Conditions , and analyze the necessary solutions , in order to Improve the Efficiency of the Equipment and to reduce the Energy Losses.

What are the Equipments we Study ...?

We analyze

» Transformers » Transformers
» DG Sets » Cooling Towers
» Compressors » Motors/Pumps
» Fans/Blowers » HVAC –R
» Lighting    

What we Study ...?

We analyze the following Parameters in Every equipments ...

TRANSFORMER

» Specific Energy Generation Rate Analysis
» Present & Best Efficiency Loading recommendations
» Reactive Power Compensation techniques
» Temperature Analysis on Engine/Alternators
» Encon Recommendations
  TOP   
DG Sets

   
» Transformer Losses (No Load & Load )
» Present and Best Efficiency Loading pattern
» K-Factor & Analysis of Impacts of Harmonics
  TOP   
Compressors
» Air Inlet/Outlet -Temperature & Pressure Analysis
» Leakage Identification by Ultrasonic Method
» Leakage Quantification (%) Study
» Design & Actual Free Air Delivery Analysis
» Iso-thermal Efficiency analysis
» Pressure Setting Analysis at Point Of Use
» Pipe Line Distribution Analysis
» Encon Recommendations
  TOP   
Motors
 
» Loading/Efficiency/Power Factor Analysis
» Reactive Power Compensation techniques
» Voltage & Current Unbalance Study
» Temperature Study
» Encon Recommendations
  TOP   
Pumps
» Head / Flow Analysis
» Best Efficiency Point Analysis with Design Data
» Pipe Line Distribution Study
» Net Positive Suction Head Analysis
» Temperature Study
» Encon Recommendations
  TOP   
Cooling Towers
 
» Range & Approach Measurements
» Loss/ Efficiency Study
» Calculation Of Cycle Of Concentration , Blow Down Losses
» L-G Ratio Study
» EnCon Recommendations
  TOP   
Fans & Blowers
 
» Design Vs Actual -Head Vs Flow Analysis
» Static/Velocity /Total Pressure calculations
» Static & Mechanical Efficiency Study
» EnCon Recommendations
  TOP   
HVAC –R
 
» Performance Study of AHU/Chillers/ Evaporators & Condensers
» Heat Load Calculations
» EER / KW/TR/COP Analysis
» EnCon Recommendations
  TOP   
Lighting
 
» Study on Present LUX level s
» Actual Vs Standard LUX Level Analysis
» Installed Load Efficacy Ratio assessment
» EnCon Recommendations
  TOP