| 1. | Power saving of 15% to 30% in the lighting load |
| 2. | Return-on-Investment in 8 to 24 months. |
| 3. | Life of lamps increases substantially resulting in reduced inventory and maintenance cost. |
| 4. | Income Tax benefit in the first year(wherever applicable): (A) 80% depreciation for being energy saving device (B) 20% additional depreciation in respect of new plant and machinery. |
| 5. | Carbon Credit can be availed. |
| 6. | Life of equipment is more than 15 years. |
| 7. | Encon – Lite Saver has 2 years warranty against all manufacturing defects. |
| 8. | No effect on power factor and harmonics. |
| TOP |
Encon - Lite Saver has direct mode and energy saving mode switch with digital energy meter. For checking the power saving achieved from Encon –Lite Saver ,run the device for one hour in direct mode and record the unit consumption and thereafter again run the device for one hour in saving mode and record the reduced unit consumption.
The difference in unit consumption between the two modes is the power saving achieved within one hour. ROI can be easily calculated from the saving achieved in one hour. Ensure that the lighting load and time is kept constant in both the modes.
The Technology
Encon - Lite Saver is designed on the technology that even though the rated voltage is specified by lamp manufacturers to start, the resulting arc can be started and stabilized at lower voltage. This reduction is achieved by introducing virtually load less impedance in the path to reduce power consumption at optimum level without affecting other parameters. Beyond certain power, performance of gas discharged lamps saturate.
Power saving is achieved by reducing excess energy consumed by lighting load. This results in substantial increase in life of lamps, choke burning reduces, thus reducing the heat and maintenance. This is based on the Principle that above saturation region, if more power is supplied to the lamps, it gets dissipated in form of heat, thereby reducing its life. This saturation current is controlled by adding inductive. Special purpose, super grade imported laminations are used having 99% efficiency.
Area of Usage
Encon –Lite Saver saves 15%-30% energy depending on lighting fixtures and site conditions. Unlike dimming ballast or retrofit device Encon – Lite Saver can be connected to all types of lighting loads which include fluorescent lights, sodium vapor, mercury vapor, CFL, metal halide, tube-lights, etc. without any changes in existing internal wiring and lighting fixtures.
Encon –Lite Saver saves 15%-30% energy depending on lighting fixtures and site conditions. Unlike dimming ballast or retrofit device Encon – Lite Saver can be connected to all types of lighting loads which include fluorescent lights, sodium vapor, mercury vapor, CFL, metal halide, tube-lights, etc. without any changes in existing internal wiring and lighting fixtures.
Range
Encon- Lite Saver is available from 25 kVA to 400 kVA in three phase 415 volts 50Hz. Encon –Lite Saver can be designed as per clients requirement also.
